You are here: Home - Products - Panels - Snap-On 675

Snap-On 675

This product snaps on with ease and is structural. The MetFab Snap-On 675 has aesthetic value with full design capabilities. With a seam height of 1.75″, the MetFab Snap-On 675 is engineered to perform. Installation is fast and easy.

MetFab produces the Snap-On 675 for architects who prefer the broad width seam, but need the structural capabilities of an engineered system. The fully integrated seam with fixed clips allows thermal movement and requires no mechanical seaming to ensure weather-tight integrity. This product can be produced on-site to exact dimensions, and will allow for an end lap-free installation. The Snap-On 675 can be installed where the slope is as low as 3/12. MetFab Snap-On 675 meets the requirements for UL 580 class 90 rating over open framing.

ASTM E 331 84 water penetration test showed no evidence of uncontrolled leakage at 6.24 psf.* ASTM E 330 84: The 1.75″ Snap-On meets the criteria in accordance with pleated air bag testing (modified ASTM E 330).
* Seam sealant required.

Uniform Live Loads | 3 Span Condition | LL is allowable live load | WL is allowable live load increased by 33%

Features:

  • Quick snap-on seaming
  • Seam height 1.75″
  • Factory or site fabricated to exact lengths
  • Standard widths: 12″, 14″, 16″, 18″
  • Meets UL 90 requirements
  • Stiffener ribs optional
  • Striation ribs optional

Materials:

  • 24ga and 22ga galvanized – Kynar 500®
  • 24ga and 22ga Galvalumeâ – Kynar 500®
  • .032 and .040 aluminum – Kynar 500®
  • 24ga Galvalume Plus®

Contact Met-Fab Today!

7450 Montevideo Road Jessup, MD 20794

Baltimore: (410) 799-1414

Toll-Free: (800) 863-8322

Fax: (410) 799-9913

Join Us Online