You are here: Home - Products - Panels - Met-Fab III

Met-Fab III

The MetFab III is our latest commercial solution for low slope applications. Whether it is a reroof or new construction, this product will fill your needs. This 2″ mechanically seamed panel is time tested and has a proven design.

MetFab III can be factory manufactured and shipped to the job, or site run for continuous length panels. Metal-Fab Manufacturing recommends that all end laps be eliminated by running full length panels from eave to ridge. The full length-mechanically seamed panel will ensure a weathertight installation. MetFab III is UL tested under the strict requirements of the UL 580 test and carries a UL 580 class 90 rating for open framing at 5′ spacing. This panel can be installed down to a 3/12 slope without sealant, or down to a 0.5/12 with sealant in the seam. The MetFab III will prove to be the most competitive and practical panel for metal building re-roof, and low slope applications.

Uniform Live Loads | 3 Span Condition | 90° seam rotation | LL is allowable live load | WL is allowable live load increased by 33.3%

Features:

  • Seam height 2″
  • All seams mechanically closed, double or single lock
  • Optional inseam sealant
  • Factory or field rolled to exact lengths
  • Standard widths: 16″ or 18″
  • ASTM E1592 Tested
  • ASTM E1646 for water penetration
  • ASTM E1680 for air leakage
  • Stiffener ribs optional
  • Striation ribs optional

Materials:

  • 24ga and 22ga galvanized – Kynar 500®
  • 24ga and 22ga Galvalumeâ – Kynar 500®
  • .032 and .040 aluminum – Kynar 500®
  • 24ga Galvalume Plus®
  • 16oz and 20oz copper
  • 16oz lead coated copper

 

Contact Met-Fab Today!

7450 Montevideo Road Jessup, MD 20794

Baltimore: (410) 799-1414

Toll-Free: (800) 863-8322

Fax: (410) 799-9913

Join Us Online